Model: PT500-805

Chip:
The minimum pressure difference is 100Pa;
3-5 times withstand voltage, suitable for dry gas differential pressure measurement;
Zero, full, temperature compensation, linear compensation;
High impedance, high precision and high stability;
More than 1 million times of service life;

Signal processing and output:
24 bit ADC sampling and processing chip;
DSP digital signal conditioning algorithm;
Multipoint line temperature calibration;
Voltage and current overload protection;
Standard industrial signal output: 4-20mA (two wire system), 0-20mA (three wire system), 0-5vdc, 0-10vdc, 0.5-4.5vdc (three wire system);
Four LED display meter, adjustable decimal places; Sampling rate of meter head: 10 times / S;

Digital communication signal output: rs485-rtu
Advanced 32bit microprocessor and 24bit ADC are adopted
The general MODBUS-RTU protocol is used as the transmission protocol
Baud rate: 1200 ~ 57600bps, check bits: none, odd, even
Support the user's secondary calibration, reset, anti reset, restore factory and other operations
Support 11 kinds of unit switching, support floating-point, integer, percentage, formatted output

Structure:
Aluminum alloy oxidation shell; 8mm + m10quick plug process connection;
The structure is small, the tightening nut is waterproof, and the outlet is electrically connected;
Supporting four / five core shielded cable;

Application:
Pressure measurement and monitoring of furnace negative pressure, dust-free workshop, Department, etc;
Pressure measurement and monitoring of front and back end of filter net, building, ventilation, etc;
Pressure measurement and monitoring of dust collection pipeline, waste gas treatment, etc;

Process connection: φ 8 quick plug + m10thread (general)... User can make specification